The Spray Smoke in A Can called Fantasy FX is used for Steam effects, Haze Effects, or Smoke Effects just by changing the lighting angle when using this product. Fantasy FX Smoke In A Can is readily available and easy to use for magical special effects that create enhanced moods, dreamy sequences, beams of light from strong lighting sources, reflections from beams off of a mirror ball.

The Profusion machine uses compressed air and an advance filtration system to emit an even, long-lasting, odorless haze. A cycle-timer, fan, and good ventilation are suggested to prevent residue if use is continuous.

The Altman UV-150 is a compact, high output blacklight. It is designed to provide high intensity illumination of fluorescent materials at distances up to 40 feet. The luminaire does not require any fans for cooling, resulting in extremely quiet operation, and it is sealed and designed for wet locations. The ballast is integrated into the housing. The UV-150 is wired with 14/3 Hi-Temp rubber cable, and is supplied with a clear safety lens.

Rosco developed the Hazemaker, a unique machine designed to create a unique effect. The machine has been designed to run continuously to fill the venue with haze and to maintain the effect. Using an on-board air compressor and a proprietary tank design, the output of the machine has been calibrated to produce just the right level for focused beams of light to be seen. These features make the Rosco Hazemaker ideal for concert and moving light applications, as well as the more traditional theatrical productions.

Continuous fog output from our Rapid Change Technology Heat Exchanger. The Show Fogger incorporates a large heating block, a strong whisper-quiet pump and our award-winning Rapid Change Technology. The machines has a large one-gallon integrated fluid tank that prevents leaks and drips, a built-in handle, special hammer-tone finish that resists scratched and wear and a built-in 4" hose adapter.

The G300 is the most technologically advanced fog machine available. Not only is it the industry-leading continuous output fogger, but it also doubles as a hazer. By simply changing the output mode and the fluid in the machine, it safely doubles as a water-based hazer. This feature has never before been available on a standard fog machine.

The Alpha 900 is the lowest priced of all Rosco fog machines, but it has a large volume for such a small machine. Weighing less than 12 lb., the Alpha 900 delivers quite a punch for a machine with a 1000 watt heater. The Alpha 900 is operated from a hand held remote attached to a 30 ft. cord which has a simple ON/OFF switch. Alternatively, the machine can be operated from an optional Wireless Remote Control that can run the machine from 30 ft.

Reliability and high performance describe the Model 1750. The machine comes in two versions: Standard and DMX. The Standard version offers fine volume control as well as on-board timers. The DMX version has the same controls as the Standard version as well as the ability to operate the machine from a lighting control board using DMX. Using improved heat exchanger design, the Model 1750 delivers over 40% more fog than the Model 1700 but can still be used on a standard circuit. Another feature of the Model 1750 is that it can easily be daisy chained, allowing up to 4 machines to be operated from a single remote.

The PF-1000 Remote Head Fogger is essentially a fog machine taken out of its box and reassembled to meet special design needs. It is designed for remote, precise applications where the use of a standard fog machine is not practical.

Using precision designed components coupled with a new electronics design known as Delta Technology™, Rosco's new Delta 3000 Fog Machine provides the tools to make fog and smoke a more versatile and creative component for any performance, film or video presentation.

The Delta 6000 fog machine produces more fog volume than almost any other system and is priced to be affordable to most users. Consuming more than nine liters of fog fluid per hour, this machine was developed to service very large stages, theme parks and particularly the demanding industrial applications that are now a significant market for fog machines. Industrial applications including military training, leak detection and safety training in buildings, aircraft and sea going vessels, demand high-output machines.